Crankshaft by Tom Batiuk & Dan Davis ...

We propose a fully-integrated temperature sensor for battery-operated, ultra-low power microsystems. Sensor operation is based on temperature independent/dependent current sources that are used with ...

Abstract: In this article, a metasurface-based liquid sensor combined with terahertz spectroscopy is proposed to detect various liquid mediums. The sensor consists of two intersecting resonant ...

In some cases without "main relay output +12v" both pins #1 and #5 should be connected to the single source of +12v. Pin #1 feeds ETB H-bridge, battery voltage sense, gp5 & gp6 high-side +12v, TLE8888 ...

Hall sensors are easy to wire, as they have no polarity. Simply connect the sensor's signal wire to any digital input on your ECU. Connect the ground pin to a sensor ground on the ECU, and the power ...

60+ years, thousands of cars, hundreds of tests—we've done the work for you.